{
  "@context": "https://schema.org",
  "@type": "Dataset",
  "@id": "https://www.z-beam.com/datasets/contaminants/iron-oxide-rust-laser-cleaning#dataset",
  "identifier": "iron-oxide-rust-laser-cleaning",
  "name": "iron-oxide-rust",
  "description": "iron-oxide-rust",
  "url": "https://www.z-beam.com/datasets/contaminants/iron-oxide-rust-laser-cleaning",
  "includedInDataCatalog": {
    "@type": "DataCatalog",
    "name": "Z-Beam Laser Cleaning Entity Registry",
    "url": "https://www.z-beam.com/datasets"
  },
  "variableMeasured": [
    {
      "@type": "PropertyValue",
      "name": "absorptionProfile",
      "value": "Strongly absorbing at 1064 nm relative to highly reflective bare steel. Absorption contrast — not unusually low ablation threshold — drives the wide process window.",
      "propertyID": "contaminant:iron-oxide-rust/facts.absorptionProfile",
      "wavelengthNm": 1064,
      "citation": [
        {
          "@id": "#deschenes-fraser-a3-steel-2002"
        }
      ]
    },
    {
      "@type": "PropertyValue",
      "name": "detectionMethods",
      "value": "[{\"method\": \"ISO 8501-1 rust grades A-D\", \"stage\": \"pre\"}, {\"method\": \"Visual comparison to ISO 8501-1 / SSPC-SP grades\", \"stage\": \"post\"}, {\"method\": \"Water-break test\", \"stage\": \"post\"}]",
      "propertyID": "contaminant:iron-oxide-rust/facts.detectionMethods",
      "citation": [
        {
          "@id": "#deschenes-fraser-a3-steel-2002"
        }
      ]
    },
    {
      "@type": "PropertyValue",
      "name": "byproducts",
      "value": "{\"airborne\":\"Iron oxide particulate fume — mineral dust, not VOC or combustion gas\",\"filtration\":\"Standard HEPA/P100 particulate extraction sufficient; no activated-carbon stage needed\",\"wasteClassification\":\"Generally non-hazardous. Caveat: structural steel/rebar with older lead-based primer beneath should be assessed for co-contamination.\"}",
      "propertyID": "contaminant:iron-oxide-rust/facts.byproducts",
      "citation": [
        {
          "@id": "#osha-table-z1"
        }
      ]
    },
    {
      "@type": "PropertyValue",
      "name": "downstreamCompatibility",
      "value": "{\"recontamination\":\"Bare, freshly cleaned steel begins re-oxidizing (flash rusting) within hours in humid or marine air if left uncoated.\",\"surfaceReadiness\":\"Fully oxide-free surface provides better coating-adhesion base than partially converted/stabilized rust.\"}",
      "propertyID": "contaminant:iron-oxide-rust/facts.downstreamCompatibility",
      "citation": [
        {
          "@id": "#deschenes-fraser-a3-steel-2002"
        }
      ]
    },
    {
      "@type": "PropertyValue",
      "name": "formationChemistry",
      "value": "Oxidation product of base iron — chemically continuous with substrate, mechanically interlocks as scale thickens.",
      "propertyID": "contaminant:iron-oxide-rust/facts.formationChemistry",
      "citation": [
        {
          "@id": "#steen-mazumder-2010"
        }
      ]
    }
  ],
  "measurementTechnique": "Laser cleaning parameter measurement",
  "license": {
    "@type": "CreativeWork",
    "name": "CC BY 4.0",
    "url": "https://creativecommons.org/licenses/by/4.0/"
  },
  "creator": {
    "@type": "Organization",
    "name": "Z-Beam Laser Cleaning"
  },
  "publisher": {
    "@type": "Organization",
    "name": "Z-Beam Laser Cleaning",
    "url": "https://www.z-beam.com"
  },
  "dateModified": "2026-07-28",
  "version": "3.0",
  "citation": [
    {
      "@type": "ScholarlyArticle",
      "@id": "#deschenes-fraser-a3-steel-2002",
      "headline": "Parameters and surface performance of laser removal of rust layer on A3 steel",
      "sameAs": "https://doi.org/10.1016/S0257-8972(02)00736-3"
    },
    {
      "@type": "ScholarlyArticle",
      "@id": "#osha-table-z1",
      "headline": "29 CFR 1910.1000 Table Z-1 — Limits for Air Contaminants",
      "sameAs": "https://www.osha.gov/annotated-pels/table-z-1"
    },
    {
      "@type": "ScholarlyArticle",
      "@id": "#steen-mazumder-2010",
      "headline": "Steen & Mazumder, Laser Material Processing, 4th ed., Springer, 2010",
      "sameAs": "https://link.springer.com/book/10.1007/978-1-84996-062-5"
    }
  ]
}