{
  "@context": "https://schema.org",
  "@type": "Dataset",
  "@id": "https://www.z-beam.com/datasets/methods/soda-blasting#dataset",
  "identifier": "soda-blasting",
  "name": "Soda Blasting",
  "description": "Soda Blasting — structured entity facts from the Z-Beam canonical registry.",
  "url": "https://www.z-beam.com/datasets/methods/soda-blasting",
  "includedInDataCatalog": {
    "@type": "DataCatalog",
    "name": "Z-Beam Laser Cleaning Entity Registry",
    "url": "https://www.z-beam.com/datasets"
  },
  "variableMeasured": [
    {
      "@type": "PropertyValue",
      "name": "description",
      "value": "Soda blasting uses sodium bicarbonate (food-grade baking soda) propelled by compressed air to gently remove surface contaminants, coatings, and corrosion products without profiling the substrate.",
      "propertyID": "method:soda-blasting/facts.description"
    },
    {
      "@type": "PropertyValue",
      "name": "keyDifferences",
      "value": "Gentler than sandblasting — baking soda (Mohs hardness 2.5 vs sand at 7.0) is water-soluble and non-toxic. Still abrasive unlike laser or dry ice. Post-job soda residue requires pH management and rinse step per California stormwater regulations.",
      "propertyID": "method:soda-blasting/facts.keyDifferences",
      "citation": [
        {
          "@id": "#baaqmd-reg12-rule4-sandblasting"
        }
      ]
    },
    {
      "@type": "PropertyValue",
      "name": "allUpCost100SqFt",
      "value": "329",
      "propertyID": "method:soda-blasting/facts.allUpCost100SqFt",
      "unitText": "USD"
    },
    {
      "@type": "PropertyValue",
      "name": "surfaceDamage",
      "value": "Low to moderate: Softer than sand or grit at Mohs 2.5. Does not create significant surface profile on steel. Can etch soft metals (aluminum, copper) or sensitize wood grain.",
      "propertyID": "method:soda-blasting/facts.surfaceDamage"
    },
    {
      "@type": "PropertyValue",
      "name": "baseHourlyRate",
      "value": "112",
      "propertyID": "method:soda-blasting/facts.baseHourlyRate",
      "unitText": "USD/hr"
    },
    {
      "@type": "PropertyValue",
      "name": "adjustedHourlyRate",
      "value": "155",
      "propertyID": "method:soda-blasting/facts.adjustedHourlyRate",
      "unitText": "USD/hr"
    },
    {
      "@type": "PropertyValue",
      "name": "cleaningRateSqFtPerHr",
      "value": "200",
      "propertyID": "method:soda-blasting/facts.cleaningRateSqFtPerHr",
      "unitText": "sq ft/hr"
    },
    {
      "@type": "PropertyValue",
      "name": "costPerSqFt",
      "value": "0.78",
      "propertyID": "method:soda-blasting/facts.costPerSqFt",
      "unitText": "USD/sq ft"
    },
    {
      "@type": "PropertyValue",
      "name": "initialSetupCost",
      "value": "175",
      "propertyID": "method:soda-blasting/facts.initialSetupCost",
      "unitText": "USD"
    },
    {
      "@type": "PropertyValue",
      "name": "consumablesCostPerHour",
      "value": "90",
      "propertyID": "method:soda-blasting/facts.consumablesCostPerHour",
      "unitText": "USD/hr"
    }
  ],
  "measurementTechnique": "Laser cleaning parameter measurement",
  "license": {
    "@type": "CreativeWork",
    "name": "CC BY 4.0",
    "url": "https://creativecommons.org/licenses/by/4.0/"
  },
  "creator": {
    "@type": "Organization",
    "name": "Z-Beam Laser Cleaning"
  },
  "publisher": {
    "@type": "Organization",
    "name": "Z-Beam Laser Cleaning",
    "url": "https://www.z-beam.com"
  },
  "dateModified": "2026-07-28",
  "version": "3.0",
  "citation": [
    {
      "@type": "ScholarlyArticle",
      "@id": "#baaqmd-reg12-rule4-sandblasting",
      "headline": "BAAQMD Regulation 12, Rule 4 — Sandblasting",
      "sameAs": "https://www.baaqmd.gov/rules-and-compliance/rules/reg-12-rule-4-sandblasting"
    }
  ]
}