Does your technician actually run the laser, or do I operate it?

Our technician runs the equipment from start to finish. You don't touch the machine. We handle delivery, setup, operation, parameter adjustments throughout the job, and cleanup. If you want to operate the laser yourself, that's our rental option — same equipment, but you're in control after a training session.

How much does a laser cleaning technician service cost?

Technician rates are $340/hr half-day, $340/hr full-day, and $300/hr multi-day. All-in — no separate equipment fees, no travel surcharge within the 9-county Bay Area. A free 60-minute on-site demo is available before any commitment.

How quickly can you schedule a technician service visit?

Most projects start within 1–5 business days. We often accommodate same-week scheduling for urgent work. For large or complex jobs, a brief pre-visit to test parameters on your material helps us optimize before the main job.

What types of jobs do you typically handle with technician service?

Common jobs include structural rust removal on steel buildings and equipment, weld prep on fabrication stock, injection mold and die cleaning, industrial equipment maintenance, and historic building or facade restoration. Technician service is especially suited to jobs where speed matters, the substrate is high-value or complex, or your team doesn't have time to run the equipment yourselves.

Is the service safe for delicate historic or antique surfaces?

Yes — and the operator's experience is what makes it safe. Our technician adjusts energy level, pulse rate, and cleaning speed continuously based on what the surface is doing, rather than locking in a setting and walking away. This live parameter control is why laser cleaning is used for heritage conservation work where abrasive methods would cause irreversible damage.

What does the technician handle for safety and compliance?

Everything. Class 4 laser safety protocols, certified eyewear, fume extraction, site enclosures where required, and full Cal/OSHA and Bay Area Air Quality Management District (BAAQMD) compliance documentation are all part of the service visit. You don't need to arrange any of it separately or brief your team on laser safety before we arrive.

…After making a few calls, Z-Beam responded the very same day.

Eric WoodView all testimonials

Z-Beam laser cleaning technician operating on-site in California

On-Site Laser Cleaning Service — We Do the Work | Bay Area

Bay Area on-site laser cleaning — our tech runs the equipment and handles cleanup. Rust, paint, coatings, and weld prep. Half-day minimum.

On-Site Demo

Free/ 60 mins

✓Coverage SF Bay Area
✓Test run your material

Book a visit

Rental

$200-$240/ HR

✓Daily $240/hr
✓Multi-Day $200/hr

Ask a question

Technician

$300-$340/ HR

✓Daily $340/hr
✓Multi-Day $300/hr

Ask a question

You don't touch the machine.

Our technician arrives, sets up, operates the Netalux Kamino 300 throughout your project, and handles all cleanup — the technician rate ($300–$340/hr) covers everything.
No operator training required on your end. No PPE to source. No parameter tuning to figure out. We bring the expertise and handle the job.
This is the right choice for time-sensitive or complex work: structural rust removal, weld prep, mold and die cleaning, and industrial maintenance.

Illustration for workflow step: You don't touch the machine.. Z-Beam laser cleaning technician operating equipment on-site

Illustration for workflow step: When to hire vs. when to rent. Laser cleaning service vs rental — which is right for your project

When to hire vs. when to rent

Hire our technician when the job is on a tight schedule, the substrate is high-value or complex (structural steel, tooling, delicate historic material), or you don't want to manage operator training and PPE.
Rent the machine when you have capable labor, a multi-day project, or a recurring job where learning the equipment makes long-term sense.
Not sure which fits your project? The free 60-minute on-site demo is a no-commitment way to see results on your actual material before deciding.

No surprises on-site.

We don't drop off equipment and leave. Our operator stays through the job, monitors output quality, and adjusts parameters as surface conditions change.
Cal/OSHA compliance, fume extraction, and Bay Area air quality documentation are handled as part of the service — you don't need to arrange any of it separately.
Questions mid-job? We're there.

…Owner showed us how to use the laser in about 30 minutes.

Vanessa Pilar GehrelsView all testimonials

FAQ

Does your technician actually run the laser, or do I operate it?
Our technician runs the equipment from start to finish. You don't touch the machine. We handle delivery, setup, operation, parameter adjustments throughout the job, and cleanup. If you want to operate the laser yourself, that's our rental option — same equipment, but you're in control after a training session.
How much does a laser cleaning technician service cost?
Technician rates are $340/hr half-day, $340/hr full-day, and $300/hr multi-day. All-in — no separate equipment fees, no travel surcharge within the 9-county Bay Area. A free 60-minute on-site demo is available before any commitment.
How quickly can you schedule a technician service visit?
Most projects start within 1–5 business days. We often accommodate same-week scheduling for urgent work. For large or complex jobs, a brief pre-visit to test parameters on your material helps us optimize before the main job.
What types of jobs do you typically handle with technician service?
Common jobs include structural rust removal on steel buildings and equipment, weld prep on fabrication stock, injection mold and die cleaning, industrial equipment maintenance, and historic building or facade restoration. Technician service is especially suited to jobs where speed matters, the substrate is high-value or complex, or your team doesn't have time to run the equipment yourselves.
Is the service safe for delicate historic or antique surfaces?
Yes — and the operator's experience is what makes it safe. Our technician adjusts energy level, pulse rate, and cleaning speed continuously based on what the surface is doing, rather than locking in a setting and walking away. This live parameter control is why laser cleaning is used for heritage conservation work where abrasive methods would cause irreversible damage.
What does the technician handle for safety and compliance?
Everything. Class 4 laser safety protocols, certified eyewear, fume extraction, site enclosures where required, and full Cal/OSHA and Bay Area Air Quality Management District (BAAQMD) compliance documentation are all part of the service visit. You don't need to arrange any of it separately or brief your team on laser safety before we arrive.

Mobile Laser Cleaning Services Across the San Francisco Bay Area

Serving residential, commercial, industrial, maritime, and historic restoration clients across Alameda, Contra Costa, Marin, Napa, San Francisco, San Mateo, Santa Clara, Solano, and Sonoma counties. Extended service also available in Santa Cruz, San Joaquin, Sacramento, Yolo, Monterey, San Benito, and Stanislaus.