Soda-Lime Glass Laser Cleaning Settings
Advanced Parameter Configuration and Troubleshooting for Soda-Lime Glass Laser Cleaning Systems
Parameter Relationships
Shows how changing one parameter physically affects others. Click any node to see its downstream impacts and role.
Pass Count
Controlled by Overlap Ratio. Adjust upstream parameters to change this.
Overlap Ratio
Better overlap in each pass means fewer total passes needed.
Soda-Lime Glass Thermal Accumulation
See if your multi-pass cleaning will overheat and damage the material
Temperature vs. Time
Safe (<150°C)
Damage (>250°C)
⚙️ Process Parameters
Pulse Energy:2000.00 mJ
Total Sim Time:90.6s
20°C
✅ Safe
Pass 1 of 3
Time: 0.0s / 90.6s
🛡️ Diagnostic & Prevention Center
Proactive strategies and reactive solutions for soda-lime glass
🌡️thermal management
Heat accumulation
Impact: Excessive heat can damage substrate or alter material properties
Solutions:
- ✓Reduce repetition rate
- ✓Increase scan speed
- ✓Add cooling time between passes
Prevention: Monitor surface temperature and adjust parameters accordingly
🔍surface characteristics
Variable surface roughness
Impact: Inconsistent cleaning results across different surface textures
Solutions:
- ✓Adjust energy density based on surface condition
- ✓Use multiple passes with progressive settings
- ✓Pre-characterize surface before cleaning
Prevention: Standardize surface preparation procedures