Skip to main content
Laser cleaning rental packages ready for Bay Area delivery

Laser Rust and Paint Removal Rental | Bay Area

Laser rust and paint removal rental in the Bay Area. Kamino 300 and Dagger 4000 with delivery, safety gear, setup, and training included.

Wood

The carving stays sharp, and the grain is not sanded. Stain and varnish lift off a deck, door, table, or carved rail without a chemical stripper soaking in.

Masonry

Tool marks and mortar lines stay. Paint and weather stains leave brick, granite, marble, and concrete without the wear blasting and grinding leave behind.

Rust

The steel stays ready to inspect, coat, or bond. Surface rust, mill scale, and weld discoloration leave doors, rails, hardware, and light automotive parts without a ground profile or blast media.

Paint

Paint comes off without cutting into the metal. On a gate, railing, or metal part, the coating leaves without a ground profile or chemical stripper residue.

Medium Duty

Use the Netalux Kamino 300 for a home, a small shop, or a detailed part. Furniture, doors, rails, light automotive, weld prep, oxide, selective paint, grease, and small molds or tools. Tight spaces and intricate surfaces are the point. Never tried laser before? It's easy to use yourself and uses standard 110-120V power. It's a popular choice to rent for a day or two. Delivery, setup, and hands-on training are included. See the Kamino operator walkthrough for the controls.

Extreme Duty

Use the Netalux Dagger 4000 for industrial and commercial work, and for heavy-duty automotive. It needs 440V power. Heavy-duty automotive is the only residential job. Delivery, setup, and training match the Kamino, and a technician can run it on site.

Included with every rental

Everything on this page ships with your rental so you stay aligned with Federal and California field controls. See compliance for the oversight map.

3M Versaflo PAPR respiratory protection

Powered airflow lowers breathing burden and heat buildup, helping operators sustain safe technique through longer cleaning cycles. Configurable headtop integration for environments where fume and fine-particle control is mandatory. In laser cleaning work, that means steadier breathing, fewer fatigue-driven pauses, and more consistent standoff and scan control across longer shifts.

Husqvarna DE-120 HEPA-filtered extractor

High capture efficiency at the source protects visibility, air quality, and downstream equipment during laser cleaning. Industrial airflow makes it suitable for controlled cleaning work where residue management affects both safety and finish quality. Stable extraction around the work head helps limit redeposition on freshly cleaned surfaces and reduces cleanup labor by containing dust where it is generated.

Husqvarna C-3000 pre-extractor

Pre-separation removes heavy particulate before it reaches the main extractor, protecting HEPA performance and reducing downtime. Preserving suction stability and filter life is essential for productivity and predictable cost. It improves resilience on long runs by reducing rapid filter-loading events that cause performance drop-offs, especially when removing heavy rust or thick coating residues.

Univet laser safety goggles

Certified laser eye protection with better long-shift wearability, so operators keep protection on instead of taking it off between passes. Univet’s laser safety line emphasizes application-specific filters and documented conformity resources, helping align PPE selection to wavelength risk, exposure mode, and task. Better fit, lens ergonomics, and clearer filter-selection logic reduce under-protection risk without over-darkening visibility on long jobs.
1

Rent yourself or hire a technician

  • Rent the machine when you have capable labor, a multi-day project, or a recurring job where learning the equipment makes long-term sense. Training and PPE are included.
  • Add a technician ($800/day) when the job is on a tight schedule, the substrate is high-value or complex, or you do not want to manage operator training and PPE.
  • Not sure which fits? The free 60-minute on-site demo is a no-commitment way to see results on your actual material before deciding. Contact us to schedule.
2

We deliver and get you going

  • Never done it before? You'll soon be an expert. Check our videos page full of new users like you saving thousands doing it the easy way.
  • You'll be set up, plugged in and ready to go with safety gear and training. Machine details are on the Kamino and Dagger pages. See compliance for site rules.
3

Help is here.

  • Need quick help mid-job? Text or call and we'll get you through.
  • Questions about PPE or safe operation? We walk through safety checks and best practices with you.
  • From setup through completion, we're part of your project's success.

FAQ

  • Can I rent a laser cleaning machine?

    Yes. A laser cleaning machine rental is the Netalux Kamino 300 or the Netalux Dagger 4000, delivered with setup and hands-on training. The Kamino uses standard 110-120V power and is the usual choice for a home or a small shop. The Dagger is for industrial and commercial work, and heavy-duty automotive is its only residential job. It needs 440V. Rates are listed above on this page.

  • What does a laser cleaner rental remove?

    A laser cleaner rental is the Netalux Kamino 300. It removes rust, paint, varnish, wood stain, mill scale, coatings, and oxidation from metal, wood, stone, and concrete, without blast media or chemicals. It functions as a non-contact laser sander on wood surfaces, clearing finish from grain without cutting into it. Most rental customers use it for rust removal on steel or iron, wood deck and furniture stripping, or paint removal from metal gates and railings.

  • Can I rent a laser sander for wood?

    Yes. A laser sander for wood rental is this laser cleaner used on decks, furniture, and other wood. The laser removes stain, varnish, and paint from wood without sanding, and works on intricate carvings or curved surfaces where abrasives are impractical. One customer stripped a vintage entry table with elaborate woodwork in about 5 hours at a rental cost of around $800. Setup takes under an hour, and training is included.

  • Is a laser cleaner the same as a laser sander?

    In practice, yes — for surface preparation and finish removal. A laser cleaner strips paint, varnish, and stain the way a sander does, but without contact, dust, or media. It doesn't abrade the surface; it vaporizes the contaminant layer. On wood it removes finish without cutting into grain; on metal it removes rust and paint without scratching or gouging. It's often described as a laser sander by rental customers doing restoration work.

  • What does it cost to rent a laser cleaner, and what's the minimum?

    Kamino 300 rental: $140/hr daily, $100/hr multi-day. Dagger 4000 rental: $240/hr daily, $200/hr multi-day. A technician add-on is $800/day. Delivery, setup, and hands-on training are included. Most focused projects — rust and paint removal on a metal table, stripping a deck section, cleaning a metal gate — complete in one day.

  • Should I rent the machine or hire your technicians?

    Rent when you have time, labor, and want to control the pace — especially for multi-day or recurring jobs. Hire our technicians when you want the job done as fast as possible, or when the application is high-stakes (structural steel, complex substrates, compliance-sensitive industrial work). Most DIY and restoration customers rent; most contractors on tight schedules hire on-site service. The technician add-on is $800/day on either machine rental.

  • Does your technician actually run the laser, or do I operate it?

    With the technician add-on, our operator runs the equipment from start to finish — delivery, setup, operation, parameter adjustments, and cleanup. If you want to operate the laser yourself, choose machine-only rental. Same equipment either way; training is included when you run it.

  • Do you deliver the machine and show me how to use it?

    Yes. Every rental includes delivery to your site, full setup, and in-person training before we leave. Training covers parameter settings for your specific job (rust vs. paint vs. wood stain), lens care, PPE, and technique for different surfaces. Most customers are operating confidently within 30 minutes. We stay available by phone or text during your rental if questions come up mid-job.

  • How do I maintain a rented laser cleaning system?

    Daily lens inspection and cleaning is critical. We supply a full checklist, spare lenses, and guidance. Proper maintenance ensures consistent performance and extends component life significantly.

  • What are the key features of the Netalux Kamino-300?

    300W pulsed fiber laser, air-cooled design, adjustable parameters, lightweight ergonomic head with long fiber cable. Excellent balance of power and portability for Bay Area job sites.

  • What safety gear is included with the rental?

    Every rental includes the laser system plus 3M Versaflo PAPR respiratory protection, Husqvarna DE-120 HEPA extraction, Husqvarna C-3000 pre-separator, and Univet laser safety goggles. You are set up for Cal/OSHA-aligned field operation without sourcing PPE separately. See the equipment guides linked on this page for operator details.

Mobile Laser Cleaning Services Across the San Francisco Bay Area

Serving residential, commercial, industrial, maritime, and historic restoration clients across Alameda, Contra Costa, Marin, Napa, San Francisco, San Mateo, Santa Clara, Solano, and Sonoma counties. Extended service also available in Santa Cruz, San Joaquin, Sacramento, Yolo, Monterey, San Benito, and Stanislaus.

(650) 590-5040
Z-Beam service van
Let's Talk