cleanLASER CL 300 Laser Cleaning Parameters
Sourcehttps://www.cleanlaser.de/en/products/lasers/mid-power-laser-systems/
Where cleanLASER's 500-watt and heavier siblings demand water cooling, the CL 300 keeps its 300 W pulsed fiber source air-cooled off a single three-phase drop, so composite-mold and tire-mold shops roll aerospace depaint onto a mobile cart. Q-switched 1064 nm pulses lift paint, oxide, and release agent without touching the mold's tool steel or the airframe's substrate beneath — pulsed selectivity the line's CW 1000-watt decoaters cannot match.
I'm from cleanLASER and want to update this data
Published values come from public manufacturer datasheets and product pages. If you represent cleanLASER and see an error, outdated figure, or missing model, send a short correction with a public source URL and we will review it.
- Company name and your role
- Machine model and the field to change
- Correct value and units
- Link to the official product page or datasheet
Published Specifications
| Brand | cleanLASER |
| Model | CL 300 |
| Origin | Germany |
| Laser type | Pulsed fiber |
| Wavelength | 1064 nm |
| Average power | 300 W |
| Cooling | Air |
Source: https://www.cleanlaser.de/en/products/lasers/mid-power-laser-systems/
Parameter ranges
cleanLASER CL 300 positioned against other cleanLASER machines. Orange/blue = this model; slate band = cleanLASER min–max for that property. Missing properties are omitted.
Pulse energy — cleanLASER lineup
CL 300 highlighted among cleanLASER systems with datasheet max pulse energy (mJ). Color = architecture.
- Q-HE
- Q-std
- MOPA
Frequently Asked Questions
Published parameters for the cleanLASER CL 300.
What is the average power of the cleanLASER CL 300?
The cleanLASER CL 300 delivers 300 W average power at 1064 nm. It uses air cooling.
What laser architecture does the cleanLASER CL 300 use?
The cleanLASER CL 300 uses a Standard Q-Switched architecture operating at 1064 nm (Pulsed fiber).
Specifications sourced from manufacturer datasheets. Values are reference data — validate against your machine's actual calibration before production use.