Laser Photonics CleanTech CF-1020 Laser Cleaning Parameters
Battery-cell and aerospace finishing set the CF-1020's brief: strip titanium oxide, anodization, and pre-adhesion contaminants where heat input, not throughput, is the constraint. Its 50 W Q-switched 1064 nm pulses lift oxides from aluminum and titanium without scarring the substrate. Air-cooled and handheld, it sits below the CF-1030 and the 500-3000 W CW CleanTech lines that chase mill-scale — the family's lightest-touch tool.
I'm from Laser Photonics and want to update this data
Published values come from public manufacturer datasheets and product pages. If you represent Laser Photonics and see an error, outdated figure, or missing model, send a short correction with a public source URL and we will review it.
- Company name and your role
- Machine model and the field to change
- Correct value and units
- Link to the official product page or datasheet
Published Specifications
| Brand | Laser Photonics |
| Model | CleanTech CF-1020 |
| Origin | USA |
| Laser type | Pulsed fiber |
| Wavelength | 1064 nm |
| Average power | 50 W |
| Cooling | Air |
Parameter ranges
Laser Photonics CleanTech CF-1020 positioned against other Laser Photonics machines. Orange/blue = this model; slate band = Laser Photonics min–max for that property. Missing properties are omitted.
Frequently Asked Questions
Published parameters for the Laser Photonics CleanTech CF-1020.
What is the average power of the Laser Photonics CleanTech CF-1020?
The Laser Photonics CleanTech CF-1020 delivers 50 W average power at 1064 nm. It uses air cooling.
What laser architecture does the Laser Photonics CleanTech CF-1020 use?
The Laser Photonics CleanTech CF-1020 uses a Standard Q-Switched architecture operating at 1064 nm (Pulsed fiber).
Specifications sourced from manufacturer datasheets. Values are reference data — validate against your machine's actual calibration before production use.