What is the pulse width of the Wuhan Sintec STPL-V-i500C?

The Wuhan Sintec STPL-V-i500C has a pulse width of 5–500 ns (adjustable). This is a MOPA (Master Oscillator Power Amplifier) architecture laser cleaning system.

What is the average power of the Wuhan Sintec STPL-V-i500C?

The Wuhan Sintec STPL-V-i500C delivers 500 W average power at 1064 nm. It uses air cooling.

What pulse repetition rate does the Wuhan Sintec STPL-V-i500C support?

The Wuhan Sintec STPL-V-i500C supports pulse repetition rates from 5 to 500 kHz.

What laser architecture does the Wuhan Sintec STPL-V-i500C use?

The Wuhan Sintec STPL-V-i500C uses a MOPA (Master Oscillator Power Amplifier) architecture operating at 1064 nm (MOPA pulsed ytterbium fiber).

Wuhan Sintec STPL-V-i500C

MOPA (Master Oscillator Power Amplifier) · China — MOPA pulsed ytterbium fiber — Independently adjustable pulse width (2–500 ns) and frequency (1–4000 kHz). High frequency flexibility; pulse energy per pulse is lower than Q-switched at equivalent average power.

Derived Parameters

Fluence at 2 mm spot	1.91 J/cm²
Fluence at 5 mm spot	0.306 J/cm²
Overlap (cleaning)	60–80%

Field spot diameter varies by scan head — 2 mm and 5 mm are representative values for handheld cleaning heads.

Derived from published specifications.

Published Specifications

Brand	Wuhan Sintec
Model	STPL-V-i500C
Origin	China
Laser type	MOPA pulsed ytterbium fiber
Wavelength	1064 nm
Average power	500 W
Max pulse energy	60 mJ
Pulse width	5–500 ns (adjustable)
Pulse frequency	5–500 kHz
Cooling	Air
Beam quality (M²)	< 1.6

Source: http://www.sintecoptronics.com/STPLLasercleaning.asp

Compatible Material Pages

Laser cleaning parameters for common materials processed by fiber laser systems.

Steel Aluminum Stainless Steel 316 Cast Iron Copper

← All machines

Specifications sourced from manufacturer datasheets. Values are reference data — validate against your machine's actual calibration before production use.