4JET JETlaser M300 Laser Cleaning Parameters
Sourcehttps://www.4jet.de/en/products/surface-cleaning/jetlaser
Engineered by a tire-industry laser specialist, the JETlaser M300 pushes 4JET's standard Q-switched tier to its water-cooled ceiling. At 300 W it holds substrate-safe nanosecond cleaning for continuous duty, sustaining tire-mold and rubber compression-mold work the air-cooled M100 and M200 cannot, yet staying below the interfacial spallation that defines the high-energy M500 and M1000. A line-scan optic sweeps a centimeters-wide cleaning stripe across weld seams and pre-bond surfaces.
I'm from 4JET and want to update this data
Published values come from public manufacturer datasheets and product pages. If you represent 4JET and see an error, outdated figure, or missing model, send a short correction with a public source URL and we will review it.
- Company name and your role
- Machine model and the field to change
- Correct value and units
- Link to the official product page or datasheet
Published Specifications
| Brand | 4JET |
| Model | JETlaser M300 |
| Origin | Germany |
| Laser type | Pulsed fiber cleaning system |
| Wavelength | 1064 nm |
| Average power | 300 W |
| Cooling | Water |
Source: https://www.4jet.de/en/products/surface-cleaning/jetlaser
Parameter ranges
4JET JETlaser M300 positioned against other 4JET machines. Orange/blue = this model; slate band = 4JET min–max for that property. Missing properties are omitted.
Pulse energy — 4JET lineup
JETlaser M300 highlighted among 4JET systems with datasheet max pulse energy (mJ). Color = architecture.
- Q-HE
- Q-std
- MOPA
Frequently Asked Questions
Published parameters for the 4JET JETlaser M300.
What is the average power of the 4JET JETlaser M300?
The 4JET JETlaser M300 delivers 300 W average power at 1064 nm. It uses water cooling.
What laser architecture does the 4JET JETlaser M300 use?
The 4JET JETlaser M300 uses a Standard Q-Switched architecture operating at 1064 nm (Pulsed fiber cleaning system).
Specifications sourced from manufacturer datasheets. Values are reference data — validate against your machine's actual calibration before production use.