Maxphotonics MFPT-100W Laser Cleaning Parameters
Sourcehttps://maxlasers.com/products
Where sub-100 W siblings serve marking-grade precision and the 500 W tier demands water cooling, the MFPT-100W stakes the air-cooled middle: one chiller-free MOPA module integrators tune across the job. Its 2–500 ns adjustable pulse length and 1–4000 kHz range let a single source shift from cold oxide cleaning on stainless to fuller coating removal — no bench, no chiller, engineered as an OEM cleaning-head engine.
I'm from Maxphotonics and want to update this data
Published values come from public manufacturer datasheets and product pages. If you represent Maxphotonics and see an error, outdated figure, or missing model, send a short correction with a public source URL and we will review it.
- Company name and your role
- Machine model and the field to change
- Correct value and units
- Link to the official product page or datasheet
OEM Laser Source Module
This is a laser source module sold to system integrators — not a complete laser cleaning machine. Specifications reflect the bare source only. End-user systems built on this module will vary in beam delivery, scan head, and enclosure.
Derived Parameters
| Fluence at 2 mm spot | 3.18 J/cm² |
| Fluence at 5 mm spot | 0.509 J/cm² |
| Overlap (cleaning) | 60–80% |
Field spot diameter varies by scan head — 2 mm and 5 mm are representative values for handheld cleaning heads.
Derived from manufacturer pulse energy data. Spot size varies by scan head — validate against your calibration.
Published Specifications
| Brand | Maxphotonics |
| Model | MFPT-100W |
| Origin | China |
| Laser type | MOPA pulsed fiber source |
| Wavelength | 1064 nm |
| Average power | 100 W |
| Pulse width | 2–500 ns (adjustable) |
| Pulse frequency | 1–4000 kHz |
| Cooling | Air |
Source: https://maxlasers.com/products
Parameter ranges
Maxphotonics MFPT-100W positioned against other Maxphotonics machines. Orange/blue = this model; slate band = Maxphotonics min–max for that property. Missing properties are omitted.
Frequently Asked Questions
Published parameters for the Maxphotonics MFPT-100W.
What is the pulse width of the Maxphotonics MFPT-100W?
The Maxphotonics MFPT-100W has a pulse width of 2–500 ns (adjustable). This is a MOPA (Master Oscillator Power Amplifier) architecture laser cleaning system.
What is the average power of the Maxphotonics MFPT-100W?
The Maxphotonics MFPT-100W delivers 100 W average power at 1064 nm. It uses air cooling.
What pulse repetition rate does the Maxphotonics MFPT-100W support?
The Maxphotonics MFPT-100W supports pulse repetition rates from 1 to 4000 kHz.
What laser architecture does the Maxphotonics MFPT-100W use?
The Maxphotonics MFPT-100W uses a MOPA (Master Oscillator Power Amplifier) architecture operating at 1064 nm (MOPA pulsed fiber source).
Specifications sourced from manufacturer datasheets. Values are reference data — validate against your machine's actual calibration before production use.