Wuhan Sintec STPL-V-I1000 Laser Cleaning Parameters
Sourcehttp://www.sintecoptronics.com/STPLLasercleaning.asp
Pulse-parameter tunability, not raw wattage, sets the STPL-V-I1000 apart: its MOPA source shapes pulse length and repetition rate to strip aluminum oxide layers and pre-weld coatings while holding post-clean roughness at or below the native substrate. Water cooling sustains that control at continuous industrial duty — a duty cycle the air-cooled 500 W sibling cannot hold, and a finish the 2000 W CW variant thermally forfeits for throughput.
I'm from Wuhan Sintec and want to update this data
Published values come from public manufacturer datasheets and product pages. If you represent Wuhan Sintec and see an error, outdated figure, or missing model, send a short correction with a public source URL and we will review it.
- Company name and your role
- Machine model and the field to change
- Correct value and units
- Link to the official product page or datasheet
Published Specifications
| Brand | Wuhan Sintec |
| Model | STPL-V-I1000 |
| Origin | China |
| Laser type | Pulsed fiber |
| Wavelength | 1064 nm |
| Average power | 1000 W |
| Cooling | Water |
Source: http://www.sintecoptronics.com/STPLLasercleaning.asp
Parameter ranges
Wuhan Sintec STPL-V-I1000 positioned against other Wuhan Sintec machines. Orange/blue = this model; slate band = Wuhan Sintec min–max for that property. Missing properties are omitted.
Pulse energy — Wuhan Sintec lineup
STPL-V-I1000 highlighted among Wuhan Sintec systems with datasheet max pulse energy (mJ). Color = architecture.
- Q-HE
- Q-std
- MOPA
Frequently Asked Questions
Published parameters for the Wuhan Sintec STPL-V-I1000.
What is the Wuhan Sintec STPL-V-I1000 best suited to clean?
The STPL-V-I1000 trades on MOPA pulse-parameter tunability sustained at 1000 W under water cooling, holding post-clean roughness at or below the native substrate where a CW cleaner would thermally roughen it. Typical applications include aluminum oxide-layer removal, pre-weld coating stripping, injection-mold cavity cleaning, and electronics substrate decontamination.
How does the Wuhan Sintec STPL-V-I1000 differ from other Wuhan Sintec laser cleaning machines?
Wuhan Sintec STPL-V-I1000: Among the Sintec cleaners it is the highest-power water-cooled MOPA — it holds pulse-tunable finish control at a continuous duty cycle the air-cooled 500 W i500C cannot sustain, without the thermal roughening of the 2000 W CW I2000 or the thick-coating spallation focus of the 1600 W Q-switched DPSS i1600.
What is the average power of the Wuhan Sintec STPL-V-I1000?
The Wuhan Sintec STPL-V-I1000 delivers 1000 W average power at 1064 nm. It uses water cooling.
What laser architecture does the Wuhan Sintec STPL-V-I1000 use?
The Wuhan Sintec STPL-V-I1000 uses a MOPA (Master Oscillator Power Amplifier) architecture operating at 1064 nm (Pulsed fiber).
Specifications sourced from manufacturer datasheets. Values are reference data — validate against your machine's actual calibration before production use.