Han's Laser HC-PD 300 Laser Cleaning Parameters
Sourcehttps://www.hanslaserus.com/product/hc-pd-pulse-mini-portable-laser-cleaner/
Only one HC-PD carries MOPA waveform control without a water chiller: the HC-PD 300. It caps Han's air-cooled tier at 300 W of tunable 1064 nm pulses, where the 500 W and 1000 W MOPA units force a coolant cart. That combination targets cordless, at-height work — graffiti on masonry facades, weld-seam oxide, mold-cavity coatings — where its fixed-pulse Q-switched siblings offer coarser control.
I'm from Han's Laser and want to update this data
Published values come from public manufacturer datasheets and product pages. If you represent Han's Laser and see an error, outdated figure, or missing model, send a short correction with a public source URL and we will review it.
- Company name and your role
- Machine model and the field to change
- Correct value and units
- Link to the official product page or datasheet
Published Specifications
| Brand | Han's Laser |
| Model | HC-PD 300 |
| Origin | China |
| Laser type | Pulsed fiber cleaner |
| Wavelength | 1064 nm |
| Average power | 300 W |
| Cooling | Air |
Source: https://www.hanslaserus.com/product/hc-pd-pulse-mini-portable-laser-cleaner/
Parameter ranges
Han's Laser HC-PD 300 positioned against other Han's Laser machines. Orange/blue = this model; slate band = Han's Laser min–max for that property. Missing properties are omitted.
Pulse energy — Han's Laser lineup
HC-PD 300 highlighted among Han's Laser systems with datasheet max pulse energy (mJ). Color = architecture.
- Q-HE
- Q-std
- MOPA
Frequently Asked Questions
Published parameters for the Han's Laser HC-PD 300.
What is the average power of the Han's Laser HC-PD 300?
The Han's Laser HC-PD 300 delivers 300 W average power at 1064 nm. It uses air cooling.
What laser architecture does the Han's Laser HC-PD 300 use?
The Han's Laser HC-PD 300 uses a MOPA (Master Oscillator Power Amplifier) architecture operating at 1064 nm (Pulsed fiber cleaner).
Specifications sourced from manufacturer datasheets. Values are reference data — validate against your machine's actual calibration before production use.