Browse by contaminant
Select a contaminant to compare machines by cleaning fluence (2 mm spot). Substrate context and material guides appear in the results.
Results
Machine fluence comparison
Rebar corrosion products (iron oxides)on Carbon steel rebar
23 in process window · 49 chartable · 45 incomplete or excluded
Substrate guide: Steel — service context (not the machine fleet)
- Wuhan Sintec STPL-V-i1600: 7.96 J/cm² — In process window
- Netalux Needle 500: 7.96 J/cm² — In process window
- Netalux Jango®: 3.18 J/cm² — In process window
- Laserax LXQ-UHP Series (500W–3kW): 3.18 J/cm² — In process window
- 4JET JETLASER M500: 3.18 J/cm² — In process window
- 4JET JETLASER M1000: 3.18 J/cm² — In process window
- P-Laser QF-2000: 3.18 J/cm² — In process window
- P-Laser QF-1000: 3.18 J/cm² — In process window
- Laserax LXQ-UHP 500W: 3.18 J/cm² — In process window
- Laserax LXQ-UHP 1000W: 3.18 J/cm² — In process window
- Wuhan Sintec STPL-V-i500C: 1.91 J/cm² — In process window
- P-Laser QF-300: 1.91 J/cm² — In process window
- SenFeng SF500HC: 1.59 J/cm² — In process window
- SenFeng SF1000HC: 1.59 J/cm² — In process window
- P-Laser QF-500: 1.59 J/cm² — In process window
- Netalux Kamino 300: 1.59 J/cm² — In process window
- Powerlase Vulcan 500c: 1.27 J/cm² — In process window
- cleanLASER CL 500: 0.80 J/cm² — In process window
- Fortune Laser FL-C500: 0.80 J/cm² — In process window
- 4JET JETLASER M200: 0.32 J/cm² — In process window
- cleanLASER CL1000iF: 0.32 J/cm² — In process window
- cleanLASER CL 500iM: 0.32 J/cm² — In process window
- Powerlase FL-C100C: 0.16 J/cm² — In process window
- Laser Photonics CleanTech CTIC-2030: 9.55 J/cm² — Near damage threshold
- Netalux Needle 200: 0.06 J/cm² — Below threshold
- Netalux Needle 300: 0.06 J/cm² — Below threshold
- Fortune Laser FL-C200: 0.06 J/cm² — Below threshold
- Fortune Laser FL-C300: 0.06 J/cm² — Below threshold
- PULSAR Laser SHARK P CL 100M: 0.05 J/cm² — Below threshold
- PULSAR Laser SHARK P CL 200M: 0.05 J/cm² — Below threshold
- PULSAR Laser SHARK P CL 300M: 0.05 J/cm² — Below threshold
- PULSAR Laser SHARK P CL 500A: 0.05 J/cm² — Below threshold
- PULSAR Laser SHARK P CL 1000A: 0.05 J/cm² — Below threshold
- Han's Laser HC-PD: 0.05 J/cm² — Below threshold
- Han's Laser HC-PD 100W: 0.05 J/cm² — Below threshold
- Han's Laser HC-PD 200W: 0.05 J/cm² — Below threshold
- P-Laser ECO-C 500: 0.05 J/cm² — Below threshold
- Han's Laser HC-PD 50W: 0.04 J/cm² — Below threshold
- JNCT Laser 100W Air Cooling Laser Cleaning Machine: 0.03 J/cm² — Below threshold
- JNCT Laser 200W Air Cooling Laser Cleaning Machine: 0.03 J/cm² — Below threshold
In windowBelow thresholdNear damageDamage risk
Fluence normalized to a 2 mm spot for comparison only. Validate on coupons before production. Click a machine name on the chart for full specs.
Change contaminant
Click a contaminant to compare machine fluence for that cleaning job. Substrate is shown in results; substrate guides appear when available.