Netalux Kamino 300 Laser Cleaning Parameters
High-Energy Q-Switched. Fixed pulse width, very high pulse energy (10–100 mJ). Optimized for interfacial detachment of thick coatings. Pulse width is not operator-adjustable.
Derived Parameters
| Peak power | 500 kW |
| Fluence at 2 mm spot | 1.59 J/cm² |
| Fluence at 5 mm spot | 0.255 J/cm² |
| Overlap (cleaning) | 60–80% |
Field spot diameter varies by scan head — 2 mm and 5 mm are representative values for handheld cleaning heads.
Derived from published specifications.
Published Specifications
| Brand | Netalux |
| Model | Kamino 300 |
| Origin | Netherlands |
| Laser type | High-energy Q-switched fiber |
| Wavelength | 1064 nm |
| Average power | 300 W |
| Max pulse energy | 50 mJ |
| Pulse width | 100 ns (fixed) |
| Pulse frequency | 2–50 kHz |
| Cooling | Water |
Source: https://www.netalux.com/
Frequently Asked Questions
Published parameters for the Netalux Kamino 300.
What is the pulse width of the Netalux Kamino 300?
The Netalux Kamino 300 has a pulse width of 100 ns (fixed). This is a High-Energy Q-Switched architecture laser cleaning system.
What is the average power of the Netalux Kamino 300?
The Netalux Kamino 300 delivers 300 W average power at 1064 nm. It uses water cooling.
What pulse repetition rate does the Netalux Kamino 300 support?
The Netalux Kamino 300 supports pulse repetition rates from 2 to 50 kHz.
What laser architecture does the Netalux Kamino 300 use?
The Netalux Kamino 300 uses a High-Energy Q-Switched architecture operating at 1064 nm (High-energy Q-switched fiber).
Compatible contaminants
Contaminants where the Netalux Kamino 300 reaches the process window (or near it) at a 2 mm comparison spot. Open a card to compare the fleet.
Biological soiling
Black crust
Limestone / marble
Black crust
Marble
Char / fire damage
Copper patina
Efflorescence
Gel coat / paint
Grease / oil
Aluminum
Grease / oil
Carbon steel
Mill scale
Oxide scale
Paint / coating
Paint / epoxy
Paint / graffiti
Rebar rust
Red rust
Release agent
Rubber residue
Soiling
Slate
Surface soiling
Ti oxide scale
Weld heat tint
Zinc coating
← All machines
Specifications sourced from manufacturer datasheets. Values are reference data — validate against your machine's actual calibration before production use.