P-Laser ECO-C 200 Laser Cleaning Parameters
Standard Q-Switched. Fixed pulse width (typically 80–200 ns), adjustable frequency within narrower range than MOPA. Lower pulse energy ceiling than high-energy Q-switched.
Derived Parameters
| Fluence at 2 mm spot | 0.0318 J/cm² |
| Fluence at 5 mm spot | 0.00509 J/cm² |
| Overlap (cleaning) | 60–80% |
Field spot diameter varies by scan head — 2 mm and 5 mm are representative values for handheld cleaning heads.
Derived from published specifications.
Published Specifications
| Brand | P-Laser |
| Model | ECO-C 200 |
| Origin | Belgium |
| Laser type | Pulsed air-cooled |
| Wavelength | 1064 nm |
| Average power | 200 W |
| Max pulse energy | 1 mJ |
| Pulse frequency | 20–200 kHz |
| Cooling | Air |
Frequently Asked Questions
Published parameters for the P-Laser ECO-C 200.
What is the average power of the P-Laser ECO-C 200?
The P-Laser ECO-C 200 delivers 200 W average power at 1064 nm. It uses air cooling.
What pulse repetition rate does the P-Laser ECO-C 200 support?
The P-Laser ECO-C 200 supports pulse repetition rates from 20 to 200 kHz.
What laser architecture does the P-Laser ECO-C 200 use?
The P-Laser ECO-C 200 uses a Standard Q-Switched architecture operating at 1064 nm (Pulsed air-cooled).
Compatible contaminants
Contaminants for fleet comparison. Open a card to chart fluence for this and other machines.
Biological soiling
Black crust
Limestone / marble
Black crust
Marble
Char / fire damage
Contamination
Alumina
Contamination
Silicon carbide
Copper patina
CrTiAlN coating
Efflorescence
Gel coat / paint
Grease / oil
Aluminum
Grease / oil
Carbon steel
HT oxide scale
Mill scale
Oxide / BUE
Oxide scale
Paint / coating
Paint / epoxy
Paint / graffiti
Rebar rust
Red rust
Release agent
Rubber residue
Soiling
Sandstone
Soiling
Slate
Surface soiling
Ti oxide scale
Weld heat tint
Zinc coating
← All machines
Specifications sourced from manufacturer datasheets. Values are reference data — validate against your machine's actual calibration before production use.